Availability: | |
---|---|
Quantity: | |
FTXP-560
FANTE
Rubber Miller:Rubber block ground into powder
It is mainly used for grinding tires, thread tires, steel wire tires (radial tires) and various miscellaneous rubber products to make them into rubber powder and reach the required fineness (mesh).
Main features
The machine body is mainly composed of integrated base, frame, front and rear rollers, transmission gear, reducer, adjusting device, roller temperature adjusting device, safety switch and electrical control system. The roll iron is made of alloy chilled cast iron with high hardness and wear resistance.
The working surface of the drum is made of alloy cast steel, which is hard, wear-resistant and has a long service life. Both ends of the drum are supported by sliding bearings and lubricated by an oil injector.
The distance between the two rolls can be adjusted within the specified range to control the discharge size.
A cooling device is installed at both ends of the roller to adjust the temperature of the roller surface.
Parameter
Rubber Miller | FTXP-400 | FTXP-450 | FTXP-560 |
Front roller diameter(mm) | ⌀400 | ⌀450 | ⌀560 |
Rear roller diameter(mm) | ⌀400 | ⌀450 | ⌀510 |
Working length of roller(mm) | 600 | 650 | 800 |
Linear speed of front roller(m/min) | 18.65 | 24.5 | 25.6 |
Friction ratio of front and rear roller | 1:1.27 | 1:1.27 | 1:1.28 |
Production capacity(kg/h) | 200~400 | 400~600 | 600~800 |
Driving motor power(kw) | 37 | 55/75 | 90/110 |
Overall size L*W*H(mm) | 3850*1800*1550 | 4650*2000*1550 | 4750*2300*2000 |
Weight(kg) | 7500 | 11000 | 18500 |
Notes | Nylon bush use grease for lubricating Copper tile and bearing are thin or dry oil lubricating |
Products show
Rubber Miller:Rubber block ground into powder
It is mainly used for grinding tires, thread tires, steel wire tires (radial tires) and various miscellaneous rubber products to make them into rubber powder and reach the required fineness (mesh).
Main features
The machine body is mainly composed of integrated base, frame, front and rear rollers, transmission gear, reducer, adjusting device, roller temperature adjusting device, safety switch and electrical control system. The roll iron is made of alloy chilled cast iron with high hardness and wear resistance.
The working surface of the drum is made of alloy cast steel, which is hard, wear-resistant and has a long service life. Both ends of the drum are supported by sliding bearings and lubricated by an oil injector.
The distance between the two rolls can be adjusted within the specified range to control the discharge size.
A cooling device is installed at both ends of the roller to adjust the temperature of the roller surface.
Parameter
Rubber Miller | FTXP-400 | FTXP-450 | FTXP-560 |
Front roller diameter(mm) | ⌀400 | ⌀450 | ⌀560 |
Rear roller diameter(mm) | ⌀400 | ⌀450 | ⌀510 |
Working length of roller(mm) | 600 | 650 | 800 |
Linear speed of front roller(m/min) | 18.65 | 24.5 | 25.6 |
Friction ratio of front and rear roller | 1:1.27 | 1:1.27 | 1:1.28 |
Production capacity(kg/h) | 200~400 | 400~600 | 600~800 |
Driving motor power(kw) | 37 | 55/75 | 90/110 |
Overall size L*W*H(mm) | 3850*1800*1550 | 4650*2000*1550 | 4750*2300*2000 |
Weight(kg) | 7500 | 11000 | 18500 |
Notes | Nylon bush use grease for lubricating Copper tile and bearing are thin or dry oil lubricating |
Products show
Copper granulation is an essential process in the recycling industry, particularly when dealing with scrap copper wire. This technique transforms copper wire into small, manageable granules that can be reused in various applications.
The question "Can shredders shred metal?" often arises when businesses and individuals seek efficient ways to manage and recycle metal waste. The answer is a resounding yes. Metal shredders are designed specifically for this purpose.
Copper wire granulators are specialized machines designed to process and recycle scrap copper wire by separating the copper from the insulation. These machines are crucial in the recycling industry, offering an efficient and eco-friendly way to reclaim valuable copper
Tire shredding is a crucial process in the recycling industry, turning waste tires into valuable resources. Have you ever wondered what happens inside a tire during the shredding process? In this article, we will explore the anatomy of a tire, the causes of tire shredding, and how to prevent it.
Have you ever wondered what happens to old tires after they’ve served their purpose on vehicles? Enter the tire shredder, an indispensable machine in the world of waste management and recycling. In this article, we will explore the significance of tire shredders and their diverse applications.
Are Single Use Water Bottles Recyclable?Single use water bottles, commonly made from Polyethylene Terephthalate (PET), are indeed recyclable.
As the journey of a tire towards recycling begins, it first encounters the feeding mechanism of the shredder.
With the growing concern over plastic waste and its environmental impact, individuals and organizations are constantly seeking effective methods to recycle and manage plastic products, such as bottles.
Ever wondered how tire shredders work? Let's break it down. A tire shredder is a machine designed to reduce old tires into smaller pieces. Why do we need this? Because recycling tires helps protect the environment and saves resources.So, what makes up a tire shredder?
Shredding rubber tires is an essential process in the tire recycling industry. It not only helps in reducing waste but also provides valuable materials that can be reused in various applications.